Difference between revisions of "Style test page"

From BOINC Wiki
Line 1: Line 1:
 +
Here are sample font-size and line-height combinations
 +
  
 
----
 
----
Line 31: Line 33:
 
----
 
----
  
−
larger font, tighter line-height - font-size: 1.0rem;  line-height: 1.3rem;
+
tighter - line-height: 1.3rem;
 +
 
 +
 
 +
<div style="line-height: 1.3rem;">'''Warning:''' If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File-&gt;Exit. If you are running as a service, Start-&gt;Run, type '''net stop boinc''' and press OK/Enter.
 +
 
 +
'''Note:''' Not all options are available in lower versions of BOINC.
 +
'''Note:''' When using a World Community Grid version of BOINC, flags may differ. Please ask at [http://www.worldcommunitygrid.org/forums/wcg/listforums?category=3&other_category_invisible=true the WCG forums] if in doubt. I did add the specific flags in this FAQ.
 +
 
 +
'''cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.'''
 +
 
 +
When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.
 +
 
 +
'''Warning:''' Any changes in the &lt;log_flags&gt; section will be used immediately. Yet a lot of changes in the &lt;options&gt; section will need a complete exit and restart of the BOINC client. They will '''not''' take if you just re-read the config file.
 +
 
 +
Below is an example of cc_config.xml, split in the &lt;log_flags&gt; and &lt;options&gt; sections. By showing where the &lt;log_flags&gt; and &lt;options&gt; go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as &quot;All types&quot; and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.
 +
 
 +
 
 +
'''BOINC Programs directory'''
 +
 
 +
The default directory where BOINC will install its executables to is:
 +
* '''Windows 32bit:''' C:\PROGRAM FILES\BOINC
 +
* '''Windows 64bit:''' C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
 +
* '''Linux:''' wherever you are unpacking it/BOINC/
 +
* '''Macintosh:''' /Applications/BOINC/
 +
 
 +
 
 +
This can also be found in the the [http://boinc.berkeley.edu/wiki/Client_configuration BOINC Wiki] .. Check the site regularly for changes/additions.</div>
 +
 
 +
 
 +
----
 +
 
 +
tighter - line-height: 1.1rem;
 +
 
 +
 
 +
<div style=" line-height: 1.1rem;">'''Warning:''' If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File-&gt;Exit. If you are running as a service, Start-&gt;Run, type '''net stop boinc''' and press OK/Enter.
 +
 
 +
'''Note:''' Not all options are available in lower versions of BOINC.
 +
'''Note:''' When using a World Community Grid version of BOINC, flags may differ. Please ask at [http://www.worldcommunitygrid.org/forums/wcg/listforums?category=3&other_category_invisible=true the WCG forums] if in doubt. I did add the specific flags in this FAQ.
 +
 
 +
'''cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.'''
 +
 
 +
When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.
 +
 
 +
'''Warning:''' Any changes in the &lt;log_flags&gt; section will be used immediately. Yet a lot of changes in the &lt;options&gt; section will need a complete exit and restart of the BOINC client. They will '''not''' take if you just re-read the config file.
 +
 
 +
Below is an example of cc_config.xml, split in the &lt;log_flags&gt; and &lt;options&gt; sections. By showing where the &lt;log_flags&gt; and &lt;options&gt; go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as &quot;All types&quot; and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.
 +
 
 +
 
 +
'''BOINC Programs directory'''
 +
 
 +
The default directory where BOINC will install its executables to is:
 +
* '''Windows 32bit:''' C:\PROGRAM FILES\BOINC
 +
* '''Windows 64bit:''' C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
 +
* '''Linux:''' wherever you are unpacking it/BOINC/
 +
* '''Macintosh:''' /Applications/BOINC/
 +
 
 +
 
 +
This can also be found in the the [http://boinc.berkeley.edu/wiki/Client_configuration BOINC Wiki] .. Check the site regularly for changes/additions.</div>
 +
 
 +
 
 +
----
 +
 
 +
larger font, tighter - font-size: 1.0rem;  line-height: 1.4rem;
 +
 
 +
 
 +
<div style="font-size: 1.0rem;  line-height: 1.4rem;">'''Warning:''' If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File-&gt;Exit. If you are running as a service, Start-&gt;Run, type '''net stop boinc''' and press OK/Enter.
 +
 
 +
'''Note:''' Not all options are available in lower versions of BOINC.
 +
'''Note:''' When using a World Community Grid version of BOINC, flags may differ. Please ask at [http://www.worldcommunitygrid.org/forums/wcg/listforums?category=3&other_category_invisible=true the WCG forums] if in doubt. I did add the specific flags in this FAQ.
 +
 
 +
'''cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.'''
 +
 
 +
When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.
 +
 
 +
'''Warning:''' Any changes in the &lt;log_flags&gt; section will be used immediately. Yet a lot of changes in the &lt;options&gt; section will need a complete exit and restart of the BOINC client. They will '''not''' take if you just re-read the config file.
 +
 
 +
Below is an example of cc_config.xml, split in the &lt;log_flags&gt; and &lt;options&gt; sections. By showing where the &lt;log_flags&gt; and &lt;options&gt; go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as &quot;All types&quot; and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.
 +
 
 +
 
 +
'''BOINC Programs directory'''
 +
 
 +
The default directory where BOINC will install its executables to is:
 +
* '''Windows 32bit:''' C:\PROGRAM FILES\BOINC
 +
* '''Windows 64bit:''' C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
 +
* '''Linux:''' wherever you are unpacking it/BOINC/
 +
* '''Macintosh:''' /Applications/BOINC/
 +
 
 +
 
 +
This can also be found in the the [http://boinc.berkeley.edu/wiki/Client_configuration BOINC Wiki] .. Check the site regularly for changes/additions.</div>
 +
 
 +
 
 +
 
 +
----
 +
 
 +
larger font, even tighter - font-size: 1.0rem;  line-height: 1.3rem;
  
  
Line 60: Line 156:
 
This can also be found in the the [http://boinc.berkeley.edu/wiki/Client_configuration BOINC Wiki] .. Check the site regularly for changes/additions.</div>
 
This can also be found in the the [http://boinc.berkeley.edu/wiki/Client_configuration BOINC Wiki] .. Check the site regularly for changes/additions.</div>
  
 +
 +
----
 +
 +
larger font, tighter - font-size: 1.0rem;  line-height: 1.2rem;
 +
 +
 +
<div style="font-size: 1.0rem;  line-height: 1.2rem;">'''Warning:''' If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File-&gt;Exit. If you are running as a service, Start-&gt;Run, type '''net stop boinc''' and press OK/Enter.
 +
 +
'''Note:''' Not all options are available in lower versions of BOINC.
 +
'''Note:''' When using a World Community Grid version of BOINC, flags may differ. Please ask at [http://www.worldcommunitygrid.org/forums/wcg/listforums?category=3&other_category_invisible=true the WCG forums] if in doubt. I did add the specific flags in this FAQ.
 +
 +
'''cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.'''
 +
 +
When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.
 +
 +
'''Warning:''' Any changes in the &lt;log_flags&gt; section will be used immediately. Yet a lot of changes in the &lt;options&gt; section will need a complete exit and restart of the BOINC client. They will '''not''' take if you just re-read the config file.
 +
 +
Below is an example of cc_config.xml, split in the &lt;log_flags&gt; and &lt;options&gt; sections. By showing where the &lt;log_flags&gt; and &lt;options&gt; go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as &quot;All types&quot; and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.
 +
 +
 +
'''BOINC Programs directory'''
 +
 +
The default directory where BOINC will install its executables to is:
 +
* '''Windows 32bit:''' C:\PROGRAM FILES\BOINC
 +
* '''Windows 64bit:''' C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
 +
* '''Linux:''' wherever you are unpacking it/BOINC/
 +
* '''Macintosh:''' /Applications/BOINC/
 +
 +
 +
This can also be found in the the [http://boinc.berkeley.edu/wiki/Client_configuration BOINC Wiki] .. Check the site regularly for changes/additions.</div>
 +
 +
 +
----
 +
 +
 +
larger font, tighter - font-size: 1.0rem;  line-height: 1.1rem;
 +
 +
 +
<div style="font-size: 1.0rem;  line-height: 1.1rem;">'''Warning:''' If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File-&gt;Exit. If you are running as a service, Start-&gt;Run, type '''net stop boinc''' and press OK/Enter.
 +
 +
'''Note:''' Not all options are available in lower versions of BOINC.
 +
'''Note:''' When using a World Community Grid version of BOINC, flags may differ. Please ask at [http://www.worldcommunitygrid.org/forums/wcg/listforums?category=3&other_category_invisible=true the WCG forums] if in doubt. I did add the specific flags in this FAQ.
 +
 +
'''cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.'''
 +
 +
When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.
 +
 +
'''Warning:''' Any changes in the &lt;log_flags&gt; section will be used immediately. Yet a lot of changes in the &lt;options&gt; section will need a complete exit and restart of the BOINC client. They will '''not''' take if you just re-read the config file.
 +
 +
Below is an example of cc_config.xml, split in the &lt;log_flags&gt; and &lt;options&gt; sections. By showing where the &lt;log_flags&gt; and &lt;options&gt; go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as &quot;All types&quot; and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.
 +
 +
 +
'''BOINC Programs directory'''
 +
 +
The default directory where BOINC will install its executables to is:
 +
* '''Windows 32bit:''' C:\PROGRAM FILES\BOINC
 +
* '''Windows 64bit:''' C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
 +
* '''Linux:''' wherever you are unpacking it/BOINC/
 +
* '''Macintosh:''' /Applications/BOINC/
 +
 +
 +
This can also be found in the the [http://boinc.berkeley.edu/wiki/Client_configuration BOINC Wiki] .. Check the site regularly for changes/additions.</div>
  
  
Line 65: Line 223:
  
  
−
here's the full css -
+
here's the typical css - note the changes from rem to em
  
 
.mw-body p { margin: 0.875em 0; }
 
.mw-body p { margin: 0.875em 0; }
 
.mw-body-content { line-height: 1.3em; font-size: 1.0em; }
 
.mw-body-content { line-height: 1.3em; font-size: 1.0em; }

Revision as of 04:58, 26 June 2016

Here are sample font-size and line-height combinations


default - font-size: 0.875em; line-height: 1.6em;


Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.

For BOINC 5.2.1 - 5.10.45: Save the cc_config.xml file into your BOINC directory.

For BOINC 6.1 - all above that: Save the cc_config.xml file into your BOINC Data directory.

This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions. 


tighter - line-height: 1.3rem;


Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.


BOINC Programs directory

The default directory where BOINC will install its executables to is:

  • Windows 32bit: C:\PROGRAM FILES\BOINC
  • Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
  • Linux: wherever you are unpacking it/BOINC/
  • Macintosh: /Applications/BOINC/


This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.


tighter - line-height: 1.1rem;


Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.


BOINC Programs directory

The default directory where BOINC will install its executables to is:

  • Windows 32bit: C:\PROGRAM FILES\BOINC
  • Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
  • Linux: wherever you are unpacking it/BOINC/
  • Macintosh: /Applications/BOINC/


This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.


larger font, tighter - font-size: 1.0rem;  line-height: 1.4rem;


Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.


BOINC Programs directory

The default directory where BOINC will install its executables to is:

  • Windows 32bit: C:\PROGRAM FILES\BOINC
  • Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
  • Linux: wherever you are unpacking it/BOINC/
  • Macintosh: /Applications/BOINC/


This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.


larger font, even tighter - font-size: 1.0rem;  line-height: 1.3rem;


Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.


BOINC Programs directory

The default directory where BOINC will install its executables to is:

  • Windows 32bit: C:\PROGRAM FILES\BOINC
  • Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
  • Linux: wherever you are unpacking it/BOINC/
  • Macintosh: /Applications/BOINC/


This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.


larger font, tighter - font-size: 1.0rem;  line-height: 1.2rem;


Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.


BOINC Programs directory

The default directory where BOINC will install its executables to is:

  • Windows 32bit: C:\PROGRAM FILES\BOINC
  • Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
  • Linux: wherever you are unpacking it/BOINC/
  • Macintosh: /Applications/BOINC/


This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.



larger font, tighter - font-size: 1.0rem;  line-height: 1.1rem;


Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.


BOINC Programs directory

The default directory where BOINC will install its executables to is:

  • Windows 32bit: C:\PROGRAM FILES\BOINC
  • Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
  • Linux: wherever you are unpacking it/BOINC/
  • Macintosh: /Applications/BOINC/


This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.



here's the typical css - note the changes from rem to em

.mw-body p { margin: 0.875em 0; } .mw-body-content { line-height: 1.3em; font-size: 1.0em; }

Retrieved from "https://boinc.mundayweb.com/wiki/index.php?title=Style_test_page&oldid=1193"