Difference between revisions of "Style test page"

Latest revision as of 04:26, 27 June 2016

Here some are sample font-size and line-height combinations

notes

The inter-para spacing is unreachable through the wiki filter, so via F12-inspect, '.mw-body p { margin: 1.0em 0; }' looked pretty good.
use rems when editing the divs below
don't forget your browser zoom

default (font-size: 0.875em; line-height: 1.6em;)

Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.

For BOINC 5.2.1 - 5.10.45: Save the cc_config.xml file into your BOINC directory.

For BOINC 6.1 - all above that: Save the cc_config.xml file into your BOINC Data directory.

This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.

font-size: 0.875em; line-height: 1.3em;

Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.

BOINC Programs directory

The default directory where BOINC will install its executables to is:

Windows 32bit: C:\PROGRAM FILES\BOINC
Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
Linux: wherever you are unpacking it/BOINC/
Macintosh: /Applications/BOINC/

This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.

font-size: 0.875em; line-height: 1.1em;

Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.

BOINC Programs directory

The default directory where BOINC will install its executables to is:

Windows 32bit: C:\PROGRAM FILES\BOINC
Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
Linux: wherever you are unpacking it/BOINC/
Macintosh: /Applications/BOINC/

This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.

font-size: 1.0em;  line-height: 1.4em;

Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.

BOINC Programs directory

The default directory where BOINC will install its executables to is:

Windows 32bit: C:\PROGRAM FILES\BOINC
Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
Linux: wherever you are unpacking it/BOINC/
Macintosh: /Applications/BOINC/

This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.

font-size: 1.0em;  line-height: 1.3em;

Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.

BOINC Programs directory

The default directory where BOINC will install its executables to is:

Windows 32bit: C:\PROGRAM FILES\BOINC
Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
Linux: wherever you are unpacking it/BOINC/
Macintosh: /Applications/BOINC/

This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.

font-size: 1.0em;  line-height: 1.2em;

Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.

BOINC Programs directory

The default directory where BOINC will install its executables to is:

Windows 32bit: C:\PROGRAM FILES\BOINC
Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
Linux: wherever you are unpacking it/BOINC/
Macintosh: /Applications/BOINC/

This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.

default (font-size: 0.875em;  line-height: 1.6em;),  font-family: verdana;

Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.

BOINC Programs directory

The default directory where BOINC will install its executables to is:

Windows 32bit: C:\PROGRAM FILES\BOINC
Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
Linux: wherever you are unpacking it/BOINC/
Macintosh: /Applications/BOINC/

This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.

font-size: 0.875em;  line-height: 1.1em;  font-family: verdana;

Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.

BOINC Programs directory

The default directory where BOINC will install its executables to is:

Windows 32bit: C:\PROGRAM FILES\BOINC
Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
Linux: wherever you are unpacking it/BOINC/
Macintosh: /Applications/BOINC/

This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.

font-size: 0.875em;  line-height: 1.2em;  font-family: verdana;

Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.

BOINC Programs directory

The default directory where BOINC will install its executables to is:

Windows 32bit: C:\PROGRAM FILES\BOINC
Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
Linux: wherever you are unpacking it/BOINC/
Macintosh: /Applications/BOINC/

This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.

font-size: 0.875em;  line-height: 1.3em;  font-family: verdana;

Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.

BOINC Programs directory

The default directory where BOINC will install its executables to is:

Windows 32bit: C:\PROGRAM FILES\BOINC
Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
Linux: wherever you are unpacking it/BOINC/
Macintosh: /Applications/BOINC/

This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.

font-size: 1.0em;  line-height: 1.1em;  font-family: verdana;

Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.

BOINC Programs directory

The default directory where BOINC will install its executables to is:

Windows 32bit: C:\PROGRAM FILES\BOINC
Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
Linux: wherever you are unpacking it/BOINC/
Macintosh: /Applications/BOINC/

This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.

font-size: 1.0em;  line-height: 1.2em;  font-family: verdana;

Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.

BOINC Programs directory

The default directory where BOINC will install its executables to is:

Windows 32bit: C:\PROGRAM FILES\BOINC
Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
Linux: wherever you are unpacking it/BOINC/
Macintosh: /Applications/BOINC/

This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.

font-size: 1.0em;  line-height: 1.3em;  font-family: verdana;

Warning: If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File->Exit. If you are running as a service, Start->Run, type net stop boinc and press OK/Enter.

Note: Not all options are available in lower versions of BOINC. Note: When using a World Community Grid version of BOINC, flags may differ. Please ask at the WCG forums if in doubt. I did add the specific flags in this FAQ.

cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.

When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.

Warning: Any changes in the <log_flags> section will be used immediately. Yet a lot of changes in the <options> section will need a complete exit and restart of the BOINC client. They will not take if you just re-read the config file.

Below is an example of cc_config.xml, split in the <log_flags> and <options> sections. By showing where the <log_flags> and <options> go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as "All types" and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.

BOINC Programs directory

The default directory where BOINC will install its executables to is:

Windows 32bit: C:\PROGRAM FILES\BOINC
Windows 64bit: C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
Linux: wherever you are unpacking it/BOINC/
Macintosh: /Applications/BOINC/

This can also be found in the the BOINC Wiki .. Check the site regularly for changes/additions.

here's the css

.mw-body p { margin: 0.875em 0; }
.mw-body-content { line-height: 1.3em; font-size: 1.0em; font-family: verdana; }

Difference between revisions of "Style test page"

Latest revision as of 04:26, 27 June 2016

Navigation menu

Views

Personal tools

Navigation

Search

Tools

@@ Line 1: / Line 1: @@
-'''Here are sample font-size and line-height combinations'''
+'''Here some are sample font-size and line-height combinations'''
-''(zoom reset: ctrl-0)''
- @all - I haven't found a way to tweek the inter-para spacing in this demo, the wiki filter ignores it.. but via F12, '.mw-body p { margin: 1.0em 0; }' looks pretty good. [[User:Bowtieguru|Bowtieguru]] ([[User talk:Bowtieguru|talk]]) 05:14, 26 June 2016 (UTC)
+''notes''
+* The inter-para spacing is unreachable through the wiki filter, so via F12-inspect, '.mw-body p { margin: 1.0em 0; }' looked pretty good.
+* use rems when editing the divs below
+* don't forget your browser zoom
@@ Line 9: / Line 12: @@
 ----
-  default - font-size: 0.875em; line-height: 1.6em;
+  default (font-size: 0.875em; line-height: 1.6em;)
@@ Line 38: / Line 41: @@
 ----
-  font-size: 0.875em; line-height: 1.3rem;
+  font-size: 0.875em; line-height: 1.3em;
@@ Line 69: / Line 72: @@
 ----
-  font-size: 0.875em; line-height: 1.1rem;
+  font-size: 0.875em; line-height: 1.1em;
@@ Line 195: / Line 198: @@
 ----
-  font-size: 1.0em;  line-height: 1.1em;
+ default (font-size: 0.875em;  line-height: 1.6em;),  font-family: verdana;
+<div style=" font-family: verdana;">'''Warning:''' If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File-&gt;Exit. If you are running as a service, Start-&gt;Run, type '''net stop boinc''' and press OK/Enter.
+'''Note:''' Not all options are available in lower versions of BOINC.
+'''Note:''' When using a World Community Grid version of BOINC, flags may differ. Please ask at [http://www.worldcommunitygrid.org/forums/wcg/listforums?category=3&other_category_invisible=true the WCG forums] if in doubt. I did add the specific flags in this FAQ.
+'''cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.'''
+When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.
+'''Warning:''' Any changes in the &lt;log_flags&gt; section will be used immediately. Yet a lot of changes in the &lt;options&gt; section will need a complete exit and restart of the BOINC client. They will '''not''' take if you just re-read the config file.
+Below is an example of cc_config.xml, split in the &lt;log_flags&gt; and &lt;options&gt; sections. By showing where the &lt;log_flags&gt; and &lt;options&gt; go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as &quot;All types&quot; and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.
+'''BOINC Programs directory'''
+The default directory where BOINC will install its executables to is:
+* '''Windows 32bit:''' C:\PROGRAM FILES\BOINC
+* '''Windows 64bit:''' C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
+* '''Linux:''' wherever you are unpacking it/BOINC/
+* '''Macintosh:''' /Applications/BOINC/
+This can also be found in the the [http://boinc.berkeley.edu/wiki/Client_configuration BOINC Wiki] .. Check the site regularly for changes/additions.</div>
+----
+ font-size: 0.875em;  line-height: 1.1em;  font-family: verdana;
+<div style=" line-height: 1.1rem; font-family: verdana;">'''Warning:''' If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File-&gt;Exit. If you are running as a service, Start-&gt;Run, type '''net stop boinc''' and press OK/Enter.
+'''Note:''' Not all options are available in lower versions of BOINC.
+'''Note:''' When using a World Community Grid version of BOINC, flags may differ. Please ask at [http://www.worldcommunitygrid.org/forums/wcg/listforums?category=3&other_category_invisible=true the WCG forums] if in doubt. I did add the specific flags in this FAQ.
+'''cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.'''
+When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.
+'''Warning:''' Any changes in the &lt;log_flags&gt; section will be used immediately. Yet a lot of changes in the &lt;options&gt; section will need a complete exit and restart of the BOINC client. They will '''not''' take if you just re-read the config file.
+Below is an example of cc_config.xml, split in the &lt;log_flags&gt; and &lt;options&gt; sections. By showing where the &lt;log_flags&gt; and &lt;options&gt; go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as &quot;All types&quot; and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.
+'''BOINC Programs directory'''
+The default directory where BOINC will install its executables to is:
+* '''Windows 32bit:''' C:\PROGRAM FILES\BOINC
+* '''Windows 64bit:''' C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
+* '''Linux:''' wherever you are unpacking it/BOINC/
+* '''Macintosh:''' /Applications/BOINC/
+This can also be found in the the [http://boinc.berkeley.edu/wiki/Client_configuration BOINC Wiki] .. Check the site regularly for changes/additions.</div>
+----
+ font-size: 0.875em;  line-height: 1.2em;  font-family: verdana;
+<div style=" line-height: 1.2rem; font-family: verdana;">'''Warning:''' If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File-&gt;Exit. If you are running as a service, Start-&gt;Run, type '''net stop boinc''' and press OK/Enter.
+'''Note:''' Not all options are available in lower versions of BOINC.
+'''Note:''' When using a World Community Grid version of BOINC, flags may differ. Please ask at [http://www.worldcommunitygrid.org/forums/wcg/listforums?category=3&other_category_invisible=true the WCG forums] if in doubt. I did add the specific flags in this FAQ.
+'''cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.'''
+When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.
+'''Warning:''' Any changes in the &lt;log_flags&gt; section will be used immediately. Yet a lot of changes in the &lt;options&gt; section will need a complete exit and restart of the BOINC client. They will '''not''' take if you just re-read the config file.
+Below is an example of cc_config.xml, split in the &lt;log_flags&gt; and &lt;options&gt; sections. By showing where the &lt;log_flags&gt; and &lt;options&gt; go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as &quot;All types&quot; and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.
+'''BOINC Programs directory'''
+The default directory where BOINC will install its executables to is:
+* '''Windows 32bit:''' C:\PROGRAM FILES\BOINC
+* '''Windows 64bit:''' C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
+* '''Linux:''' wherever you are unpacking it/BOINC/
+* '''Macintosh:''' /Applications/BOINC/
+This can also be found in the the [http://boinc.berkeley.edu/wiki/Client_configuration BOINC Wiki] .. Check the site regularly for changes/additions.</div>
+----
+ font-size: 0.875em;  line-height: 1.3em;  font-family: verdana;
+<div style=" line-height: 1.3rem; font-family: verdana;">'''Warning:''' If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File-&gt;Exit. If you are running as a service, Start-&gt;Run, type '''net stop boinc''' and press OK/Enter.
+'''Note:''' Not all options are available in lower versions of BOINC.
+'''Note:''' When using a World Community Grid version of BOINC, flags may differ. Please ask at [http://www.worldcommunitygrid.org/forums/wcg/listforums?category=3&other_category_invisible=true the WCG forums] if in doubt. I did add the specific flags in this FAQ.
+'''cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.'''
+When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.
+'''Warning:''' Any changes in the &lt;log_flags&gt; section will be used immediately. Yet a lot of changes in the &lt;options&gt; section will need a complete exit and restart of the BOINC client. They will '''not''' take if you just re-read the config file.
+Below is an example of cc_config.xml, split in the &lt;log_flags&gt; and &lt;options&gt; sections. By showing where the &lt;log_flags&gt; and &lt;options&gt; go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as &quot;All types&quot; and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.
+'''BOINC Programs directory'''
+The default directory where BOINC will install its executables to is:
+* '''Windows 32bit:''' C:\PROGRAM FILES\BOINC
+* '''Windows 64bit:''' C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
+* '''Linux:''' wherever you are unpacking it/BOINC/
+* '''Macintosh:''' /Applications/BOINC/
+This can also be found in the the [http://boinc.berkeley.edu/wiki/Client_configuration BOINC Wiki] .. Check the site regularly for changes/additions.</div>
+----
+  font-size: 1.0em;  line-height: 1.1em;  font-family: verdana;
+<div style=" font-size: 1.0rem; line-height: 1.1rem; font-family: verdana;">'''Warning:''' If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File-&gt;Exit. If you are running as a service, Start-&gt;Run, type '''net stop boinc''' and press OK/Enter.
+'''Note:''' Not all options are available in lower versions of BOINC.
+'''Note:''' When using a World Community Grid version of BOINC, flags may differ. Please ask at [http://www.worldcommunitygrid.org/forums/wcg/listforums?category=3&other_category_invisible=true the WCG forums] if in doubt. I did add the specific flags in this FAQ.
+'''cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.'''
+When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.
+'''Warning:''' Any changes in the &lt;log_flags&gt; section will be used immediately. Yet a lot of changes in the &lt;options&gt; section will need a complete exit and restart of the BOINC client. They will '''not''' take if you just re-read the config file.
+Below is an example of cc_config.xml, split in the &lt;log_flags&gt; and &lt;options&gt; sections. By showing where the &lt;log_flags&gt; and &lt;options&gt; go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as &quot;All types&quot; and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.
+'''BOINC Programs directory'''
+The default directory where BOINC will install its executables to is:
+* '''Windows 32bit:''' C:\PROGRAM FILES\BOINC
+* '''Windows 64bit:''' C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
+* '''Linux:''' wherever you are unpacking it/BOINC/
+* '''Macintosh:''' /Applications/BOINC/
+This can also be found in the the [http://boinc.berkeley.edu/wiki/Client_configuration BOINC Wiki] .. Check the site regularly for changes/additions.</div>
+----
+ font-size: 1.0em;  line-height: 1.2em;  font-family: verdana;
+<div style="  font-size: 1.0rem; line-height: 1.3rem; font-family: verdana;">'''Warning:''' If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File-&gt;Exit. If you are running as a service, Start-&gt;Run, type '''net stop boinc''' and press OK/Enter.
+'''Note:''' Not all options are available in lower versions of BOINC.
+'''Note:''' When using a World Community Grid version of BOINC, flags may differ. Please ask at [http://www.worldcommunitygrid.org/forums/wcg/listforums?category=3&other_category_invisible=true the WCG forums] if in doubt. I did add the specific flags in this FAQ.
+'''cc_config.xml is mainly used for debugging BOINC. By enabling these flags BOINC writes specific information both to the Messages tab/Event Log, to stderrdae.txt and stdoutdae.txt.'''
+When you are using BOINC 5.8.2 or above, it isn't necessary to stop the BOINC client. Just edit the cc_config.xml file and tell Boinc Manager to read the file, through Advanced, Read config file.
+'''Warning:''' Any changes in the &lt;log_flags&gt; section will be used immediately. Yet a lot of changes in the &lt;options&gt; section will need a complete exit and restart of the BOINC client. They will '''not''' take if you just re-read the config file.
+Below is an example of cc_config.xml, split in the &lt;log_flags&gt; and &lt;options&gt; sections. By showing where the &lt;log_flags&gt; and &lt;options&gt; go in each section, you ought to be able to know where goes what when you make your cc_config.xml file. When saving with a text editor, make sure you save as &quot;All types&quot; and in ANSI format. That way the editor won't auto-add a TXT extension and the file will be readable by BOINC.
+'''BOINC Programs directory'''
+The default directory where BOINC will install its executables to is:
+* '''Windows 32bit:''' C:\PROGRAM FILES\BOINC
+* '''Windows 64bit:''' C:\PROGRAM FILES (x86)\BOINC for 32bit BOINC, C:\PROGRAM FILES\BOINC for 64bit BOINC
+* '''Linux:''' wherever you are unpacking it/BOINC/
+* '''Macintosh:''' /Applications/BOINC/
+This can also be found in the the [http://boinc.berkeley.edu/wiki/Client_configuration BOINC Wiki] .. Check the site regularly for changes/additions.</div>
+----
+ font-size: 1.0em;  line-height: 1.3em;  font-family: verdana;
-<div style="font-size: 1.0rem;  line-height: 1.1rem;">'''Warning:''' If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File-&gt;Exit. If you are running as a service, Start-&gt;Run, type '''net stop boinc''' and press OK/Enter.
+<div style="  font-size: 1.0rem; line-height: 1.3rem; font-family: verdana;">'''Warning:''' If you are using a BOINC version lower than 5.8.2, before you add or edit cc_config.xml, exit BOINC. Normally in Boinc Manager File-&gt;Exit. If you are running as a service, Start-&gt;Run, type '''net stop boinc''' and press OK/Enter.
 '''Note:''' Not all options are available in lower versions of BOINC.
@@ Line 227: / Line 413: @@
-here's the typical css
+here's the css
   .mw-body p { margin: 0.875em 0; }
-  .mw-body-content { line-height: 1.3em; font-size: 1.0em; }
+  .mw-body-content { line-height: 1.3em; font-size: 1.0em; font-family: verdana; }